Past Manufacturing Webcasts

According to a Forbes magazine article, there were 2,365 cyberattacks in 2023 with 343,338,964 victims, a 72% increase in data breaches since 2021. This is the first webinar in our series of 3 to help DoD contractors and Sub Contractors to guard themselves and their IP from cyber attacks and avoid fines from not meeting […]

If you were able to run an early analysis on your designs, how much time would you save avoiding re-work downstream? PTC has improved and evolved CFD Analysis over the past few years with their Creo Flow suite of tools. Most CFD Analysis tools are very expensive and most require a specialist for use. However, […]

PTC Windchill lets you define and manage all the different tasks that need to be performed to execute a project from end to end while in a secure environment – protecting ALL of your data (intellectual property). An important aspect of the project execution capabilities of PTC Windchill is its ability to connect tasks with […]

Generative Design is innovative 3D CAD software that uses AI to leverage algorithms and computational power to automatically generate multiple design options according to a set of input parameters and constraints (rather than relying solely on human creativity and intuition). While Generative Design is a leading edge innovation tool, adjusting your processes may be necessary […]

This webinar will review a PTC solution called Codebeamer, a complete application lifecycle management solution with all-in-one requirements, risk, and test management capabilities providing traceability automatically. This also allows you to connect all your development tools to provide your teams with a central development hub and provide an automated process control to easily facilitate regulatory […]

This webinar will provide insight in how to streamline the product development process in order to speed up internal processes and get more products to market faster. This webinar will focus on solutions in the Creo CAD suite that help define a digital thread strategy. Industry veteran Jerry Raether will discuss and show the following: […]

This webinar will review the following and more: • Usability and productivity enhancements • Improvements in electrification • Enhanced composite design and manufacturing • Expanded model-based definition tools • Simulation-driven design and generative design • Advanced manufacturing tools Creo 11 includes all the capabilities of previous Creo versions.

GD&T is the process of annotating designs and drawings for downstream processes, such as tolerance analysis, inspection and other production activities, using a symbolic language to define the allowable deviation of feature geometry. In the past, GD&T was a painstaking process, but not anymore. Creo GD&T Advisor provides expert guidance, saving you time and mistakes. […]

PTC Windchill “comprehends” supporting information (such as an inventory, associated costs and analysis data) that one needs to see before approving a change. You can also define different sequences of change tasks (e.g., one set of steps for a design engineering change; a different set of tasks if the manufacturing team needs to update tooling […]

Creo Mechanism Dynamics Option (MDO) allows you to simulate real-world forces virtually and analyze how your product will react to them. Gaining insight into product behavior early in the design phase allows you to build better products faster and more affordably.

Creo’s Generative Design Extension uses Artificial Intelligence (AI) to automatically generate the optimal design solving for system design requirements such as loads, constraints, preferred materials, and manufacturing processes. • Designs are created “right the first time” solving for design criteria and objectives • Generative design delivers radical change and innovation • Designs are optimized for […]

Windchill PLM is used in a wide range of manufacturing industries and has become an essential tool for manufacturers and product developers helping them to manage product information, processes, and collaboration across the entire product lifecycle. Windchill continues to evolve, incorporating new technologies such as the Internet of Things (IoT), artificial intelligence (AI), and cloud […]

This webinar will focus on solving issues related to designing assemblies. These issues include: – Manual Processes to handle a Concurrent Design process – Improving Communication regarding Design Criteria and Assembly References – Protecting your Intellectual Property – Enforcing a Top-Down Design Methodology – Preventing Unwanted Dependencies and limiting Change Propagation We will include a […]

Creo Flow is a robust solution to empower the Design and Engineering Department to help make design decisions early to avoid scrap and re-work. This tool supports manufacturing sustainability initiatives. • Familiar Creo command ribbon UI with Context sensitive menus, Simplified Workflows and a Single GUI for setup, simulation and post processing • Seamless integration […]

Windchill PLM is CAD agnostic and manages any CAD file and various CAD formats, including tricky SolidWorks files. Windchill is programmed to understand SolidWorks relationships and file types such as Parts, Assemblies, Drawings and External References. This allows you to edit SolidWorks data directly in the PDM/PLM system and drive different workflows, lifecycle states and […]