Simerics-MP+® includes all the capabilities of Simerics-MP with additional features such as streamlined setup procedures, automated mesh/re-mesh for key components (especially moving components), and customized data reduction.
Simerics-MP+ for Vehicle®, one of the vertical applications of Simerics-MP+, provides accurate virtual testing for the analysis of vehicular under-hood thermal management systems, various performance parameters corresponding to vehicle aerodynamics, HVAC etc. Multiphase vehicle applications include fuel tank sloshing/filling, plenum drainage, water fording, windshield de-icing, and more. Simerics-MP+® uses the latest in CFD architecture combined with Simerics’ proprietary algorithms and physical models. The unique advantages and capabilities of Simerics-MP+® are as listed below:
Flow, Turbulence, conjugate heat transfer, multiphase, particles.
Excellent correlation with test data over the full operating range.
No CAD clean up, model creation for a whole vehicle from original CAD geometry in 2-3 hours with accurate representation of the geometry.
Simerics®-MP+for Marine is a 3-D Computational Fluid Dynamics (CFD) tool that provides accurate virtual testing for the analysis and performance prediction of hull design, friction and wave resistance, effective horsepower, self-propelling acceleration/speed, boat/ship porpoising, ship maneuvering, seakeeping and propulsion systems. The unique advantages and capabilities of Simerics®-MP+ are as listed below:
Flow, turbulence, multiphase with free surface, conjugate heat transfer, aeration, cavitation.
Excellent correlation with test data over the full operating range.
CAD to simulation in 10 minutes or less, 1-2 hours for steady-state results.
Self-propelled acceleration, porpoising, maneuvering, seakeeping etc.
Simerics®-MP+ for PD is a 3-D Computational Fluid Dynamics (CFD) tool that provides accurate virtual testing for the analysis and performance prediction of positive displacement compressors, pumps, motors, and associated systems. For liquid systems, Simerics®-MP+ for PD’s proprietary cavitation module accurately models vapor, free gas and liquid compressibility to enable the analysis of performance, pressure ripple, and cavitation damage.
Flow, turbulence, conjugate heat transfer, real gasses, aeration, cavitation, particles.
Excellent correlation with test data over the full operating range.
Less than an hour from “dirty” CAD to simulation.
Accurately model leakage gaps, tip clearances, balance holes, etc.
Simerics–MP+ for Turbo® , one of the vertical applications of Simerics-MP+, provides accurate virtual testing for the analysis and performance prediction of turbomachinery, including axial/mixed flow/centrifugal compressors, pumps, motors, turbines, and connected systems for whole spectrum of specific speed and full operating range including shutoff. For liquid systems, Simerics–MP+ for Turbo’s proprietary cavitation Module accurately models vapor, free gas and liquid compressibility to enable the analysis of performance, pressure ripple, and cavitation damage.
Flow, Turbulence, conjugate heat transfer, real gasses, aeration, cavitation, particles.
Excellent correlation with test data over the full operating range.
Less than an hour from CAD to simulation, under 15 min. for steady-state results.
Accurately model leakage gaps, tip clearances, balance holes, etc.
Simerics-MP+® for Valves is a 3-D Computational Fluid Dynamics (CFD) tool that provides accurate virtual testing for the analysis and performance prediction of valves and associated systems. Simerics-Valves can accurately compute the dynamics of a valve based on its geometry, physical properties, spring constant, and surrounding fluid pressures. For liquid systems, Simerics-MP+® for valves’ proprietary Cavitation Module accurately models vapor, free gas and liquid compressibility to enable the analysis of performance, pressure ripple, and cavitation damage.
Valve Dynamics, flow, turbulence, conjugate heat transfer, aeration, cavitation, particles.
Excellent correlation with test data over the full operating range.
Less than an hour from CAD to simulation.
Accurately model tight clearances, complex geometries, etc.
Simerics-MP+ for Systems ® is a 3-D Computational Fluid Dynamics (CFD) tool that combines the capabilities of Simerics-MP®, Simerics-MP+ for Turbo®, Simerics-MP+ for Valves® and/or Simerics-MP+ for PD® to simulate complex fluid systems with unparalleled accuracy and speed.
Flow, turbulence, conjugate heat transfer, real gasses, aeration, cavitation, particles, and fluid-structure interaction.
Excellent correlation with test data for a wide range of systems.
Complex system models created in less than a day.
Accurately model a variety of integrated components and systems.
